Proffie 2.2

Introducing the Proffie board 2.2: The most advanced and powerful soundboard we currently offer. This neopixel soundboard is highly customisable. The Proffie board runs Proffie OS which enables complete control of the sensors and components. While you will receive a preconfigured lightsaber, the sky is the limit as to what you do with it.

Features

Resources

Features

We are working on this page.

Proffieboard is a highly capable soundboard that offers an extreme level of customisation. This is not overly difficult to learn, but it is very much a DIY option if you wish to make changes to the lightsaber beyond swapping sound fonts.

Connecting to your board.

The proffie connects to your computer via a microusb cable which is not included. There are many options available from places such as Amazon. You must ensure it is capable of data transfer, not just charging, so look for data transfer rates in the marketing to validate this functionality. Many hilts have limited access to the microusb port. A 90 degree cable or swivel/rotating connector is recommended.

Heavy by Jaydalorian
Angelic Plasma by Mountain Sabers
Ani-Mation by Juan Sith
Mando Saber by Juan Sith
D Maul by Jaydalorian
Dark Sith Red by Mountain Sabers
Electric Essence by Mountain Sabers
Emperor by Juan Sith
Fallen Order Bundle (Cal Kestis) by Juan Sith
JumpBike by Mountain Sabers
Jurassic by Mountain Sabers
LSkywalker by Jaydalorian
Obi EP3 by Juan Sith
Rogue Commander by Thexter
Sebulba by Jaydalorian
Smooth Fuzz by Thexter
Smooth Grey by Thexter
Smooth Jedi by Thexter
Stargate by Lux Sabers
Teensy by KRSabers
The Begginer by Mountain Sabers
The Prize by Mountain Sabers
Tythonian Crystal by Dayad Jocen
Ultron by Mountain Sabers
Unhinged by Genesis Custom Sabers

Instructions

SABER OFF

Power on: Hold the button until it illuminates.

BLADE OFF

Ignition:

Tap the button, or
Twist the saber (if enabled),

Muted ignition: Double tap the button and hold.

Enter/Exit Volume Menu: Hold the button and clash the saber.

Increase Volume: Tap the button while in menu.

Decrease Volume: Hold and release the button while in menu.

Next Preset: Hold and release the button (~1 second).

Previous Preset: Hold the button.

Play/Stop Music: Double tap the button.

Check Battery Level: Triple Tap the button.

Power off: Hold the button until the light turns off.

BLADE ON

Retraction:

Hold the button until it begins retracting, or
Twist the lightsaber

Smooth Swing: Move the hilt around

Spin: Spin or move the hilt quickly

Blaster Block: Tap the activation button

Flash on Clash: Hit the saber/blade

Lock Up: Hold the button and clash the hilt

Force Effect: Angle the hilt upwards, hold the button and twist.

Stab: Thrust forward into a clash

Melt Effect: Hold the button, thrust forward into a clash.

Drag Effect: Angle the hilt down, hold the button and clash.

Change Colour:

Angle the hilt downwards Hold the activation button and twist, or
Hold the button for 2 flashes (~1 second)

Enter/Exit Battle Mode: Triple Click the button and hold.

Enter Multi-Block Mode: Swing and Hold the button for 1 second, then release

Exit Multi-Block Mode: Tap the button

Enter Colour Change Mode: Angle the hilt downwards, hold the button and twist.

Confirm Colour: Hold the button until audio confirmation

Some of our sabers have two buttons. They are referred to as Main and Auxiliary (Aux) buttons. There are some variations to the controls above.

Power on: Hold the activation button until it illuminates.

BLADE OFF

Blade length Toggle: Press the power button 6 times to toggle between 82 and 92cm blade lengths.

Ignition:

Tap the Main button, or
Twist the saber

Muted ignition: Double tap the button and hold.

Next Preset: Tap the Aux button (hilt level or angled upwards)

Previous Preset: Tap the Aux button (hilt angled downwards)

Power Off: Press the Aux button 3 times.

BLADE ON

Retraction:

Tap the Main button, or
Twist

Smooth Swing: Move the hilt around

Blaster Block: Tap the Aux button

Lockup: Hold the Aux button and clash the saber

Flash on Clash: Hit the saber/blade

Drag Effect: Hold the Aux button and then stab downwards.

Stab Effect: Forward thrust clash

Melt Effect: Hold any button and thrust forward into a forward clash

Lightning Block: Hold the Main button and tap the Aux.

Force Effect: Hold the Main button and release (~1s)

Change Colour: Hold the Aux button and tap the Main button. Slowly rotate the lightsaber to change the blade colour. Tap the Main button to select.

Adjust Volume: Enter volume adjustment mode by holding the Main and Aux buttons simultaneously. An audio prompt will indicate success. Adjust the volume up or down by pressing the Main or Aux button respectively. Long press the Aux button to exit the mode.

Play/Stop Music: Long press the Main button

Enter Multi-Block Mode: Hold the Aux button for ~1 second, then release. Swing to trigger blaster blocks.

Exit Multi-Block Mode: Any button press or a clash/stab etc

Enter/Exit Battle Mode: Hold the Aux button and swing

Power off: Tap the Main button