Features
The latest from TXQ. This fourth generation of SN Pixel board has the following features.
-
Control your saber from your Android / iOS device via bluetooth.
-
Accurate motion tracking with smooth swing to alter the pitch of the hum in time with your movements.
-
27 sound fonts included
-
Programmable 32gb SD card
-
Customise each font to make them unique with:
-
RGB colour mixing, chose any colour blade you like and easily swap between 12 presets.
-
9 Blade Effects
-
11 ignition types
-
-
Create custom blade effects through the App. ​
-
Add or remove fonts
-
Removable Blade
-
Adjustable Brightness
-
Adjustable Volume (high, low and mute presets plus percentage based control via the app)
-
Gesture Controls
-
Sound effects:
-
Blaster Block
-
Tip drag
-
Clash
-
Melt
-
Spin
-
Stab
-
Lockup
-
Force push
-
Background Music
-
-
Ani's Padawan (Ahsoka) by Juan Sith
-
Angry Anakin by Juan Sith
-
Blue Lady Master by Juan Sith
-
Depa (Master Depa) by Juan Sith
-
Darth Maul by Jaydalorian
-
Dookula by Juan Sith
-
Dark Sith Red by Mountain Sabers
-
Emperor V1 by Kyberphonic
-
Fallen Order Bundle (Cal Kestis) by Juan Sith
-
Frolic Frog (Yoda) by Juan Sith
-
Graflex 9 (Rey) by Juan Sith
-
Grumpy Ben (Kylo Ren) by Juan Sith
-
Inquisitor by Juan Sith
-
LSkywalker by Jaydalorian
-
Mace Windy (Windu) by Juan Sith
-
Mando Saber by Juan Sith
-
Master Mundi by Juan Sith
-
Obi EP3 by Juan Sith
-
Quin Vos (Quinlan Vos) by Juan Sith
-
Revanchist Reborn by Juan Sith
-
Revanchist Butcher by Juan Sith
-
Temple Guard by Juan Sith
-
TFU Secret Apprentice (Starkiller) by Juan Sith
-
The Lost Sister by Juan Sith
-
The Princess by Juan Sith
-
Tulak: The Greatest Swordsman by Juan Sith
-
Rogue Vader by Juan Sith
Instructions
SABER OFF
Blade length Toggle: Tap the power button 6 times to toggle between 82 and 92cm blade lengths.
Power on: Hold the activation button until it illuminates.
​
BLADE OFF
Ignition:
-
Press the activation button, or
-
Twist the saber (if enabled), or
-
Thrust forward (if enabled), or
-
Swing the saber (if enabled)
Adjust Volume: Hold the activation button for 1 flash (~0.5 seconds)
Change Ignition Effect: Hold the activation button for 2 flashes(~1 second)
Change Blade Effect: Hold the activation button for 3 flashes (~1.5 seconds)
Next Font: ​
-
Angle the hilt upwards, hold the button and twist, or
-
Hold the activation button for 4 flashes (~2 seconds)
Play Music: Angle the hilt downwards, hold the button and twist.
Stop Music: Angle the hilt downwards , hold the button and twist.
Change Music: Stop then play music to move to the next track.
Power off: Hold the button until the light turns off.
​
BLADE ON
Retraction:
-
Hold the activation button until it begins retracting, or
-
Twist clockwise (if enabled), or
-
Pull backwards (if enabled)
Smooth Swing: Move the hilt around
Spin: Spin or move the hilt quickly
Blaster Block: Tap the activation button
Flash on Clash: Hit the saber/blade
Lock Up: Hold the activation button until it flashes 1 time. Press again to end
Force Effect: Angle the hilt upwards, hold the activation button and twist
Stab: Thrust forward
Melt Effect: Hold the activation button and thrust forward.
Drag Effect: Hold the activation button and then impact the saber.
Change Colour:
-
Angle the hilt downwards Hold the activation button and twist, or
-
Hold the button for 2 flashes (~1 second)
Flash on Clash on/off: Hold the button until it flashes 3 times
Power off: Hold the activation button for 4 flashes (~2 seconds)
Some of our sabers have two buttons. They are referred to as Main and Auxiliary (Aux) buttons. There are some variations to the controls above.
Blade length Toggle: Press the Main button 6 times to toggle between 82 and 92cm blade lengths.
Power on: Hold the activation button until it illuminates.
​
BLADE OFF
Ignition:
-
Press the Main button, or
-
Twist the saber (if enabled), or
-
Thrust forward (if enabled), or
-
Swing the saber (if enabled)
Adjust Volume: Enter volume adjustment mode my tapping the Main and Aux buttons simultaneously. An audio prompt will indicate success. Adjust the volume up or down by pressing the Main or Aux button respectively. Tap the Main and Aux buttons simultaneously to exit the mode.
Change Ignition Effect: Hold the Main button for 2 flashes(~1 second)
Change Blade Effect: Hold the Aux button for 1 second, then release
Next Font:
-
Tap the Aux button, or
-
Angle the hilt upwards, hold the Aux button and twist the hilt
Play Music: Angle the hilt downwards, hold the Aux button and twist the hilt
Stop Music: Angle the hilt downwards , hold the Aux button and twist the hilt
Change Music: Stop then play music to move to the next track.
Power Off: Press the Aux button 3 times.
​
BLADE ON
Retraction:
-
Hold the activation button until it begins retracting, or
-
Twist clockwise (if enabled), or
-
Pull backwards (if enabled)
Smooth Swing: Move the hilt around
Spin: Spin or move the hilt quickly
Blaster Block: Tap the Aux button
Flash on Clash: Hit the saber/blade
Lock Up: Hold the Aux button for 1 second, then release. Tap again to stop.
Force Effect: Angle the hilt upwards, hold the Aux button and twist
Stab: Thrust forward
Melt Effect: Hold the Aux button and thrust forward.
Drag Effect: Hold the Main button and then impact the saber.
Change Colour:
-
Angle the hilt downwards Hold the Aux button and twist, or
-
Hold the Aux button for 2 flashes (~1 second) (TBC)
Flash on Clash on/off: Tap the Main and Aux buttons simultaneously
Power off: Tap the Main button
GESTURE CONTROL TIPS
Gesture controls can be enabled or disabled via the app.
​
What exactly is a twist?
Twist should be a fairly rapid flick of the wrist to rotate the hilt about 45 degrees to the required side, then back to centre.
Config Editing
Coming soon!